BrownDog 030502A MSOP-8 or SOT23-8 to 8 pin DIP Adapter

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • BrownDog 030502A MSOP-8 or SOT23-8 to 8 pin DIP Adapter
  • BrownDog 030502A MSOP-8 or SOT23-8 to 8 pin DIP Adapter Without Pins Installed

MSOP-8/SOT23-8 to DIP8 Adapter - p/n 030502A

Be the first to review this product

Availability: In stock

$3.00
  • Buy 5 for $2.85 each and save 5%
  • Buy 10 for $2.70 each and save 10%
  • Buy 25 for $2.55 each and save 15%
  • Buy 50 for $2.40 each and save 20%
  • Buy 100 for $2.25 each and save 25%
  • Buy 250 for $2.10 each and save 30%
  • Buy 500 for $1.95 each and save 35%

Quick Overview

Features
  • Converts an MSOP-8 or SOT23-8 surface-mount IC to an 8 pin DIP footprint
  • Pin-to-pin correspondence
  • 0.400 in. X 0.400 in. X 0.048 in. board dimensions
  • 0.193 in. total height (including contact pins)
  • DIP pins on 0.100 in. (2.54mm) pitch by 0.300 in. row spacing
  • Surface-mount pads on 0.65mm pitch
  • Electroless nickel immersion gold (ENIG) surface finish
  • Available either with or without pins installed

* Required Fields

$3.00

Product Description

The BrownDog™ 030502A is an MSOP-8 or SOT23-8 to 8 pin DIP adapter. With the electronics industry's move to surface-mount technology, many integrated circuits are now only available in SMT packages. While SMT is preferable for high-volume, automated manufacturing, prototyping and evaluation with this type of IC is difficult without a way to easily connect test probes to their contact pins. And compared to its through-hole siblings, it is difficult to remove an SMD from its circuit board without expensive hot-air rework equipment, and without damaging the component itself or the PCB. The 030502A adapter provides a convenient solution when working with MSOP-8 or SOT23-8-package devices in these situations. As a pin-to-pin adapter, an MSOP-8 or SOT23-8 component installed on the 030502A will be functionally equivalent to an 8 pin DIP device. Whether you're replacing an existing DIP device, designing for interchangeability, or in prototyping and evaluation, the 030502A is the perfect answer.

The 030502A is made with contemporary PCB design techniques, software, and manufacturing. With electroless nickel immersion gold (ENIG) surface finish for conductivity and flat surface planarity, and 0.012 in. minimum trace widths, there will be no detectable difference between an MSOP-8 or SOT23-8 device (0.65mm pitch) mounted to the 030502A and an equivalent DIP device. We provide you the option of buying the 030502A adapter either with or without pins installed. If you need an IC mounted to this adapter, contact us for a quote. We can source manufacturer-authorized components for your requirements, or install your customer-supplied parts to this adapter.

Additional Information

Part Number 030502A