SC70-8 to DIP Adapter – BrownDog 030502B



  • Converts an SC70-8 surface-mount IC to an 8 pin DIP footprint
  • Pin-to-pin correspondence
  • 0.400 in. X 0.400 in. X 0.048 in. board dimensions
  • 0.193 in. total height (including contact pins)
  • DIP pins on 0.100 in. (2.54mm) pitch by 0.300 in. row spacing
  • Surface-mount pads on 0.50mm pitch
  • Electroless nickel immersion gold (ENIG) surface finish
  • Available either with or without pins installed
SKU: 1007 Category:

The BrownDog™ 030502B is an SC70-8 to 8 pin DIP adapter. With the electronics industry’s move to surface-mount technology, many integrated circuits are now only available in SMT packages. While SMT is preferable for high-volume, automated manufacturing, prototyping and evaluation with this type of IC is difficult without a way to easily connect test probes to their contact pins. And compared to its through-hole siblings, it is difficult to remove an SMD from its circuit board without expensive hot-air rework equipment, and without damaging the component itself or the PCB. The 030502B adapter provides a convenient solution when working with SC70-8-package devices in these situations. As a pin-to-pin adapter, an SC70-8 component installed on the 030502B will be functionally equivalent to an 8 pin DIP device. Whether you’re replacing an existing DIP device, designing for interchangeability, or in prototyping and evaluation, the 030502B is the perfect answer.

The 030502B is made with contemporary PCB design techniques, software, and manufacturing. With electroless nickel immersion gold (ENIG) surface finish for conductivity and flat surface planarity, and 0.010 in. minimum trace widths, there will be no detectable difference between an SC70-8 device (0.50mm pitch) mounted to the 030502B and an equivalent DIP device. We provide you the option of buying the 030502B adapter either with or without pins installed. If you need an IC mounted to this adapter, contact us for a quote. We can source manufacturer-authorized components for your requirements, or install your customer-supplied parts to this adapter.

0/5 (0 Reviews)
Weight 0.001 oz
Dimensions 0.4 × 0.4 × 0.3 in
Part Number



There are no reviews yet.

Be the first to review “SC70-8 to DIP Adapter – BrownDog 030502B”

Your email address will not be published. Required fields are marked *