Shop
-
8-pin DIP Socket – 081001
Add to cartThis Mill-Max 8-pin DIP socket fits any BrownDog Adapters with an 8-pin DIP footprint, as well as any standard 8-pin DIP component.
-
14-pin DIP Socket – 170601
Add to cartThis Mill-Max 14-pin DIP socket fits the BrownDog 050101, 060601, 070401, and 180801 adapters, as well as any standard 14-pin DIP component.
-
28-pin DIP Socket
Add to cartThis Mill-Max 28-pin DIP socket fits the BrownDog 190601 SOIC-28 to 28-pin DIP and 190602 SSOP-28 to 28-pin DIP adapters, as well as any standard 28-pin DIP component.
-
TO-99-8 Socket – 170602
Add to cartThis Mill-Max TO-99 socket fits the BrownDog 020601A 8-pin DIP to TO-99 adapter as well as any TO-99-8 “metal can” component. It is also available as a pre-mounted component option on the BrownDog 020601B and 111001 adapters.
-
ML2036CP Sine Wave Generator Adapter – 141001
Add to cartFeatures
- Replaces ML2036CP sine wave generator IC with AD9833 programmable waveform generator IC.
- 0.700 in. X 0.400 in. X 0.047 in. board dimensions
- DIP-14 pins on 0.100 in. pitch by 0.300 in. row spacing
- Green solder mask, HASL surface finish
- Assembled with Mill-Max 3157 contact pins, AD9833BRMZ IC at U1 and the following capacitors:
- C0603C103K8RACTU at C1
- 0306ZC104KAT2A at C2
- 0306ZC104KAT2A at C3
- T491A106K010AT at C4
- Assembled using standard Sn63/Pb37 non-RoHS compliant leaded solder.
-
CO-442 Oscillator Adapter – 180802
Add to cartFeatures
- Replaces CO-442 clock oscillator with DS1099U-WT+ Low-Frequency Dual EconOscillator IC.
- 0.700 in. X 0.400 in. X 0.047 in. board dimensions
- 0.193 in. total height (including contact pins)
- DIP pins on 0.100 in. (2.54mm) pitch by 0.300 in. row spacing
- Electroless nickel immersion gold (ENIG) surface finish
- Assembled with Mill-Max 3157 contact pins, DS1099U-WT+ IC and 0.1uF 0402 capacitor installed.
-
CO-281 Oscillator Adapter – 190201
Add to cartFeatures
- Replaces Vectron CO-281 oscillator with LTC1799 oscillator IC.
- 1.200 in. by 1.200 in. board dimensions
- Electroless nickel immersion gold (ENIG) surface finish
- Assembled with Mill-Max 1267 contact pins and components at the following locations:
- LTC1799CS5#TRMPBF at U1
- UA78L05ACDR at U2
- PTN0805E1603BST1 at R1
- CL21B334KBFNNNE at C1
- GRM155R61C104KA88D at C2
- GRM155R61C104KA88D at C3
