BrownDog 970601 SO8 to 8 pin DIP Adapter

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • BrownDog 970601 SO8 to 8 pin DIP Adapter
  • BrownDog 970601 SO8 to 8 pin DIP Adapter With IC Installed
  • BrownDog 970601 SO8 to 8 pin DIP Adapter Without Pins Installed
  • BrownDog 970601 SO8 to 8 pin DIP Adapter Assembled Panel

SO8 to DIP8 Adapter - p/n 970601

Be the first to review this product

Availability: In stock

$3.00
  • Buy 5 for $2.85 each and save 5%
  • Buy 10 for $2.70 each and save 10%
  • Buy 25 for $2.55 each and save 15%
  • Buy 50 for $2.40 each and save 20%
  • Buy 100 for $2.25 each and save 25%
  • Buy 250 for $2.10 each and save 30%
  • Buy 500 for $1.95 each and save 35%

Quick Overview

Features
  • Converts an SO8 (SOIC-8) surface-mount IC to an 8 pin DIP footprint
  • Pin-to-pin correspondence
  • 0.400 in. X 0.400 in. X 0.048 in. board dimensions
  • 0.193 in. total height (including contact pins)
  • DIP pins on 0.100 in. (2.54mm) pitch by 0.300 in. row spacing
  • Surface-mount pads on 0.050 in. (1.27mm) pitch
  • Electroless nickel immersion gold (ENIG) surface finish
  • Available either with or without pins installed
  • Available with optional audio op amp installed

* Required Fields

$3.00

Product Description

The BrownDog™ 970601 is an SO8 (SOIC-8) to 8 pin DIP adapter. With the electronics industry's move to surface-mount technology, many integrated circuits are now only available in SMT packages. While SMT is preferable for high-volume, automated manufacturing, prototyping and evaluation with this type of IC is difficult without a way to easily connect test probes to their contact pins. And compared to its through-hole siblings, it is difficult to remove an SMD from its circuit board without expensive hot-air rework equipment, and without damaging the component itself or the PCB. The 970601 adapter provides a convenient solution when working with SO8-package devices in these situations. As a pin-to-pin adapter, an SO8 component installed on the 970601 will be functionally equivalent to an 8 pin DIP device. Whether you're replacing an existing DIP device, designing for interchangeability, or in prototyping and evaluation, the 970601 is the perfect answer.

The 970601 is made with contemporary PCB design techniques, software, and manufacturing. With electroless nickel immersion gold (ENIG) surface finish for conductivity and flat surface planarity, and 0.015 in. minimum trace widths, there will be no detectable difference between an SO8 device (0.050 in./1.27mm pitch) mounted to the 970601 and an equivalent DIP device. We provide you the option of buying the 970601 adapter either with or without pins installed, or with your choice of optional audio op amps installed. If you need a different IC mounted to this adapter, contact us for a quote. We can source manufacturer-authorized components for your requirements, or install your customer-supplied parts to this adapter.

Additional Information

Part Number 970601