SOT-23 to DIP Adapter – BrownDog 041103A



  • Converts an SOT23 (up to 6 pins) surface-mount IC to a 6 pin DIP footprint
  • Pin-to-pin correspondence
  • 0.400 in. X 0.300 in. X 0.048 in. board dimensions
  • 0.193 in. total height (including contact pins)
  • DIP pins on 0.100 in. (2.54mm) pitch by 0.300 in. row spacing
  • Surface-mount pads on 0.95mm pitch
  • Electroless nickel immersion gold (ENIG) surface finish
  • Available either with or without pins installed
SKU: 1012 Category:

The BrownDog™ 041103A is an SOT23-5 or SOT23-6 to 6 pin DIP adapter. With the electronics industry’s move to surface-mount technology, many integrated circuits are now only available in SMT packages. While SMT is preferable for high-volume, automated manufacturing, prototyping and evaluation with this type of IC is difficult without a way to easily connect test probes to their contact pins. And compared to its through-hole siblings, it is difficult to remove an SMD from its circuit board without expensive hot-air rework equipment, and without damaging the component itself or the PCB. The 041103A adapter provides a convenient solution when working with SOT23-package devices in these situations. As a pin-to-pin adapter, an SOT23-6 component installed on the 041103A will be functionally equivalent to a 6 pin DIP device. Whether you’re replacing an existing DIP device, designing for interchangeability, or in prototyping and evaluation, the 041103A is the perfect answer.

The 041103A is made with contemporary PCB design techniques, software, and manufacturing. With electroless nickel immersion gold (ENIG) surface finish for conductivity and flat surface planarity, and 0.015 in. minimum trace widths, there will be no detectable difference between an SOT23 device (0.95mm pitch) mounted to the 041103A and an equivalent DIP device. We provide you the option of buying the 041103A adapter either with or without pins installed. We can also partially populate the through-holes with fewer than six contact pins. If you need an IC mounted to this adapter, contact us for a quote. We can source manufacturer-authorized components for your requirements, or install your customer-supplied parts to this adapter.

0/5 (0 Reviews)
Weight 0.001 oz
Dimensions 0.4 × 0.3 × 0.3 in
Part Number



There are no reviews yet.

Be the first to review “SOT-23 to DIP Adapter – BrownDog 041103A”

Your email address will not be published. Required fields are marked *