TA7136 Upgrade Adapter – BrownDog 111002

Description

The TA7136 op amp is a single-channel op amp in a 7-pin SIL (single-inline) package that was produced by Toshiba Corporation. The BrownDog 111002 TA7136 Upgrade Adapter replaces the TA7136 with an 8-pin DIP or a surface mount SOIC-8 single-channel op amp.

Features

• Plug-in compatibility with existing TA7136 op amps
• Footprint for one 8-pin DIP or SOIC-8 single-channel op amp on front surface of adapter maps to the pinout for a TA7136 op amp in a 7-pin single-inline (SIL) footprint.
• Pins are on 0.1 in. [2.54mm] single-inline grid pattern.
• Pins on bottom edge of adapter come pre-installed to adapter board.
• Low loss 12 mil minimum trace width when used with SOIC-8 component, or 30 mil minimum trace width when used with DIP-8 component
• Available unpopulated, with one 8-pin DIP socket installed, or with a selection of pre-installed op amps

Specifications

• Board dimensions: 0.700 in. [17.8mm] by 0.550 in. [14.0mm] by 0.062 in. [1.6mm]
• SMT pitch: 0.050 in. [1.27mm]
• Through-hole diameter: 0.035 in. [0.89mm]
• Through-hole grid pattern: 0.100 in. [2.54mm] pitch, 0.300 in. [7.62mm] row spacing
• Pin length (from bottom edge of adapter to end of pins): 0.25 in. [6.4mm]
• Pin pitch: 0.100 in. [2.54mm]
• Number of pins: 7
• PCB manufactured to IPC-6012 Class II standards
• Board material: FR-4 (UL94V-0), Tg 130°C minimum, 1 oz. copper
• Copper surface finish: ENIG
• Black solder mask on both sides of PCB

Datasheet
111002 Datasheet (PDF)